wiring info

Home / the12volt's Install Bay / General Discussion / wiring info (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

getsumbaby

Member - Posts: 1

Joined: June 20, 2003

Location: United States

Posted: June 20, 2003 at 6:49 PM / IP Logged

I have a 2003 Ford F-150 SuperCrew 4x4 and I put neon lights under the front seats. I want the lights to light up when the doors are open just like the dome lights. How do I wire them into the doors? I dont see any switches or anything? Any help would be great.

lncmarkviii

Member - Posts: 24

Joined: May 16, 2003

Location: United States

Posted: June 20, 2003 at 8:40 PM / IP Logged

you should be able to wire them directly to the dome light ciurcut, look for a white and red wire in the kick panel or behind the headlight switch. this wire will have 12 volts when the door is open. hook youur hot side up to that wire and ground the other side

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring info

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.