Tach Install Problem 04 Accent

Home / the12volt's Install Bay / General Discussion / Tach Install Problem 04 Accent (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

04Hyundai

Member - Posts: 1

Joined: March 07, 2005

Location: United States

Posted: March 07, 2005 at 7:20 PM / IP Logged

I have hooked up a Summit tach in my 04 Accent. I tapped the grey wire pin #8 off of the ECU for my signal. The tach does work but it doesnt read the same as my stock tach any ideas why?

Back to Top

Thetruth

Member - Posts: 5

Joined: March 07, 2005

Location: United States

Posted: March 07, 2005 at 8:42 PM / IP Logged

I had a similar problem with my 2003 accent i had a Sunpro guage and had the same problem mine had a difference of arounb 300 rpms between the two. I taped into the gray wire behind the guage cluster but its the same thing. I think i had the problem because i had a cheap guage.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Tach Install Problem 04 Accent

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.