Just a little help with '99 Pathfinder

Home / the12volt's Install Bay / General Discussion / Just a little help with '99 Pathfinder (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dljbrla

Member - Posts: 23

Joined: October 20, 2002

Location: United States

Posted: November 17, 2002 at 7:22 PM / IP Logged

I want to install a alarm / keyless entry in a 1999 Pathfinder. I have the wiring diagram, but wondered if some of the pros might share a couple of pointers with me. Like,

1) Do I have to disable the factory security system....how?

2) Where's the easiest place to tie into the door locks, 12+power

3)Anything else that may help.........thanks in advance...you guys are a big help with this stuff Just a little help with '99 Pathfinder -- posted image.

Danny

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: November 17, 2002 at 8:15 PM / IP Logged

first you need a dei 555u your truck has immobileizer system . this needs to be used or the car will not remote start. you will loose a factory key for remote start . factory disarm is in the keyless entry module colored. light green and and is negative and has to be atached to aftermarket alarms output for disarming alarms. before you activate this try to see if the alarms turns on and off with lock/unlock. door locks are at the same keyless entry unit they are lt GREEN/ red and brown this is negative ./ you dont need any relays for this system just tapinto the wires and try lock unlock and if it is opposite than switch the two wires and your good to go .

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

dljbrla

Member - Posts: 23

Joined: October 20, 2002

Location: United States

Posted: November 17, 2002 at 9:38 PM / IP Logged

thanks for the quick reply Jon,

I will not be installing the remote start parts...just the alarm/keyless entry. thanks for the info....one more please......exactly where is the " keyless entry module"???

again thanks, your comments are a help.

Danny

dljbrla

Member - Posts: 23

Joined: October 20, 2002

Location: United States

Posted: November 19, 2002 at 8:12 AM / IP Logged

Hey Jon....you out there?????

Danny

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: November 20, 2002 at 7:52 PM / IP Logged

Its located on the left side of the steering column.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Just a little help with '99 Pathfinder

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.