trying the glass

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / trying the glass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dangerranger96

Copper - Posts: 163

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 05, 2004

Location: United States

Posted: August 10, 2004 at 12:04 AM / IP Logged

I just started doing a fiberglass box for a 96 regular cab Ford Ranger. Im 6'2" so i dont have a lot of leg room in the truck in the first place and i wanted a little more boom than the 10" in the wood box so im glassing it. Im gonna start putting pictures up as i get them. i did one layer tonight but i have to wake up early so i have to get some sleep

dangerranger96

Copper - Posts: 163

Joined: April 05, 2004

Location: United States

Posted: August 20, 2004 at 1:01 PM / IP Logged

well i got 2 layers done on it but i had to get it pulled out so that i could put my seats back in so i could drive it, so theres no pics of it yet. i had to move to college a week ago so nothing has been done to it since i pulled it out. Hopefully ill be able to go home and work on it again soon. Ill get pics of it as soon as i go back

vdubmk4

Copper - Posts: 175

Joined: August 04, 2004

Location: United States

Posted: August 20, 2004 at 2:03 PM / IP Logged

My freind has a 94 ford ranger and we made an enclousure for a 12 that fits right in the two seats flush against the back of the cab with the sub also facing the rear. It worked out real good cause we extended off the front of the box an arm rest with some cup holders. Just thought i'd tell you that, maybe its something else you could consider if the glassin falls through.

Fortune: You will continue to take chances, and be glad you did.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trying the glass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.