4 channel amp 1 solo baric

Home / the12volt's Install Bay / Car Audio / 4 channel amp 1 solo baric (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dwofford

Member - Posts: 39

Joined: January 13, 2008

Location: Oklahoma, United States

Posted: April 20, 2009 at 6:17 PM / IP Logged

this may be a stupid question but i cant seem to find the excact answer in need. I have a 4 channel sony amp 600w and i want to get a solobaric L5 or L7, Can i hook up rear outputs bridged to one coil and front outputs bridged to other coil. I will be splitting rca's from 2 to 4 i don't know the amp ohms but the sub says 2-4ohms.

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 20, 2009 at 9:41 PM / IP Logged

If the speaker has dual 4 ohm coils, then yes you can bridge one coil to each pair of channels. Most sony amps wil feed both left and right channels from the Left RCA jack. Just to make sure, look for the (BTL) next to the white RCA jack.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

4 channel amp 1 solo baric

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.