the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

how to wire up more than 2 sets of door speakers


Post ReplyPost New Topic
< Prev Topic Next Topic >
ak609 
Member - Posts: 47
Member spacespace
Joined: December 04, 2014
Location: Alaska, United States
Posted: November 30, 2015 at 7:06 PM / IP Logged Link to Post Post Reply Quote ak609
I have 3 sets of pioneer door speakers which can handle 35 watts rms. Since there are more than 4 speakers how would i wire these up to a amp and what kind of amp would i need? Thank you in advance its going into a limo.
http://www.pioneerelectronics.com/PUSA/Car/Speakers/A-Series/TS-A1372R?tab=specifications
ak609 
Member - Posts: 47
Member spacespace
Joined: December 04, 2014
Location: Alaska, United States
Posted: November 30, 2015 at 7:14 PM / IP Logged Link to Post Post Reply Quote ak609
i believe i answered my own question by using a 2 channel amp use one channel for one set of 4 and the other channel for the other set of four. input would still be welcomed though please.
zmasta101 
Member - Posts: 2
Member spacespace
Joined: October 17, 2012
Location: Illinois, United States
Posted: December 01, 2015 at 7:03 AM / IP Logged Link to Post Post Reply Quote zmasta101
For the amp input? If its a factory radio, use a line output converter to get old speaker wires converted to rca. Then hook those to amp. Otherwise some amps have a low level input, then u can skip the loc and hookip there
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: December 06, 2015 at 10:27 AM / IP Logged Link to Post Post Reply Quote DYohn
If you would like your amplifier to last a while, be sure to wire your speakers for a net impedance load the amp can handle. Use the woofer wiring wizard in the left column if you need help. (Woofer are just speakers)
Support the12volt.com
ak609 
Member - Posts: 47
Member spacespace
Joined: December 04, 2014
Location: Alaska, United States
Posted: December 09, 2015 at 1:11 PM / IP Logged Link to Post Post Reply Quote ak609
yeah sorry was brain dead that day put the two rear door speakers on the rear part of the amplifier than put the front two sets of speakers on the front channel and just adjusted them till they were putting out the same sound with the gain levels. this was for a limo and it sounded awesome.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer