electrical grease

Home / the12volt's Install Bay / Car Audio / electrical grease (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

TAudio

Copper - Posts: 64

Joined: May 09, 2003

Location: United States

Posted: May 26, 2003 at 8:24 PM / IP Logged

I'm kind of a freak about wanting as good as possible of a connections in my power runs for my amps. Was wondering if a blob of that "electrical grease" in my distribution and fuse block holes before I insert the wires might cut down on some of the inherant resistance and oxidation at that point. If any one knows a good source for this stuff that would be great too.

If quiters never win, and winners never quit, who the heck came up with the idea that you should quit while your ahead?

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: May 27, 2003 at 8:45 AM / IP Logged

You don't need a blob, a little bit of grease will do just fine. I use it on all of my connections and never had a problem . As for a place to get it you should be able to get it at any local electronics supply store and maybe Radio Shack. I don't buy it I get it from work. Now make sure that your distribution block and fuse holder are good quality because I've used it on cheap ones and the cheap platting just comes off.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

electrical grease

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.