How To Connect 12 Volt Power Car Aerial?

Home / the12volt's Install Bay / Car Audio / How To Connect 12 Volt Power Car Aerial?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bondy99

Member - Posts: 1

Joined: May 05, 2024

Location: Australia

Posted: May 08, 2024 at 6:37 AM / IP Logged

Hi,

I have a Ford Falcon AU2, year 2000 car. I have a Kenwood Radio KDC-BT51OU installed. The original Ford Factory fitted radio was removed.

I have a power aerial with a red and green wire terminal plug but cannot see any other wires.

Does anyone know how I can connect the aerial to the Kenwood radio so the aerial can raise when the radio is on and retracts when the radio is off.

Thanks.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.