Professional's info needed.

Home / the12volt's Install Bay / Car Audio / Professional's info needed. (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

syclone

Member - Posts: 2

Joined: April 17, 2003

Posted: June 13, 2003 at 1:42 AM / IP Logged

Would two Mtx 8ohm svc subs rated at 400 rms, wired bridged in a 4ohm load on a punch 800 amp (800X1 at 4ohm) be over driven or just right?

Syclone

Detail is everything

Back to Top

Big Purds

Silver - Posts: 574

Joined: November 25, 2002

Location: Canada

Posted: June 13, 2003 at 3:56 AM / IP Logged

which subs?

you have to take into consideration the fact that box design also has so much to do with this that no one can really give you a proper answer without knowing how big the box will be and if it will be sealed or ported or whatever...

under perfect circumstances you would have no worries doing this, but if you get carried away with the wrong box or get a little too happy when adjusting your gains you do run a risk of blowing them up...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Professional's info needed.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.