Treo Engineering

Home / the12volt's Install Bay / Car Audio / Treo Engineering (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

l7sdime

Copper - Posts: 55

Joined: July 26, 2003

Location: United States

Posted: September 14, 2003 at 4:00 PM / IP Logged

Has anybody ever heard treo engineering subs?? I have been to their websie treoonline.com ad the SSX series subwoofers seem pretty bad!!! I reallylike icker but i am going for total spl and i would like to know how these would sound?? i would only put 2 of their SSX 12's in y s-10 bcuz they are so expensive. Also has anybody heard of resonant engineering? how are these on the spl end of things?? also what amps should i run for the treo's if i happen to get them?? thanks for the help.

Wes

Back to Top

fuseblower

Silver - Posts: 403

Joined: June 25, 2003

Location: United States

Posted: September 15, 2003 at 7:47 AM / IP Logged

Treo Engineering subs pound... The only thing about them is that they are expensive.

Back to Top

italnpimp59

Silver - Posts: 427

Joined: August 26, 2003

Location: United States

Posted: September 15, 2003 at 7:56 PM / IP Logged

resonant engineering are loud subs....they can be very productive in an SPL competition with the right ported box. i have seen people use resonant engineering subs... the XXX version and hit some high numbers. i also saw a guy with one of those subs, a 15", in too small of a box...and with 1500 watts only hit 140.5 dB

Back to Top

l7sdime

Copper - Posts: 55

Joined: July 26, 2003

Location: United States

Posted: September 17, 2003 at 1:45 PM / IP Logged

Yeh Treo engineering seemed like they knew what they were doin with there stuff. Do you think these would hit alot harder than 3 l7 12's with about 800 watts goin to each one. they will be in a massive ported box(the kickers). I have plenty of space to put a box im in the "All boom, No zoom" category. It doesnt have to look the greatest just quake over everybody else. Can i get some more opinions on this please?? thanks

Wes

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Treo Engineering

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.