Building custom system need help

Home / the12volt's Install Bay / Car Audio / Building custom system need help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Biohazardous

Member - Posts: 6

Joined: September 15, 2003

Location: United States

Posted: October 08, 2003 at 12:28 PM / IP Logged

OK i have built basic systems before but i have never built one of the magnitude i want to make this one. . . . I dont even know if i can describe the way i want it. . . .lol. . . I want to make the sub enclosures plexi on one side I am goin to put mirror inside and neon. . .then some glass will be involved also but the part i am havin trouble with is my amp rack idea. . . .I would like to have then spin yes u read correctly spin. . . I want them to be on a short stand mounted to like 1/2 or 3/4 plexi with the edges roughed up so neon wil illuminate them but i want them to spin somehow. . .i have not legistically figured this out yet.. . so anyone with ideas please reply or even if u have some feedback on my plans let me know. . .I will be gettin this underway hopefully in the next couple of months but i need to plan it all out first.. . . thanx for the help. . . .

Justin

toadia

Member - Posts: 18

Joined: March 08, 2003

Location: United States

Posted: October 08, 2003 at 12:34 PM / IP Logged

some companies sell sliding door contacts that have a spring loaded pin in one side. you could use that for the amp side. But you would have to get some blank circut boards and etch perfect circles on the and the solder your wires to that . you will also need a motor to spin the amps and some electronics knowhow. Not that hard to do if you know what you are doing. But if it is a high current draw anp the contacts might not be heavy-duty enough.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Building custom system need help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.