00' BMW 328i amp install

Home / the12volt's Install Bay / Car Audio / 00' BMW 328i amp install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: November 22, 2003 at 2:36 PM / IP Logged

Its been a few years since I did a system in a BMW, Do they still have the factory amp located in the left rear 1/4. If im installing a amp to drive the interior speakers, can i grab the speaker leads off the factory harness behind the radio, or is there a amp in the trunk that i have to bypass and throw caps on the tweeter leads like the older bmw's?. Do I need a dash kit for an aftermarket radio, or is it a standard Din opening? obvioulsy i could tell by looking, but this is for a friend of mine, so i havent seen the car yet!

Thanks

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

Back to Top

brianl

Member - Posts: 6

Joined: December 20, 2003

Posted: January 22, 2004 at 5:33 PM / IP Logged

This should be the same as my vehicle which is a 2000 328ci. The amp is in the left rear 1/4 and you'll have to grab the speaker leads there and bypass the amp. You wil need a dask kit for and after market radio, this is very easy to install. Have Fun.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

00' BMW 328i amp install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.