JBL 300.1 and 2X JL w0

Home / the12volt's Install Bay / Car Audio / JBL 300.1 and 2X JL w0 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

skiflyer45

Member - Posts: 33

Joined: August 28, 2002

Location: United States

Posted: November 30, 2003 at 9:34 PM / IP Logged

I recently bought a jbl bp300.1 to hook up to my 2 12"JL w0's. Anyways....I hooked everything up, however it is just not loud enough. I run a Jensen 300 watt amp before and the jbl is not a single little bit louder, it might even be less.Is there a way to brigdge on this amp......has anybody a similar setup???? Any tips or suggestions??

Thanks in advance

Back to Top

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: November 30, 2003 at 10:15 PM / IP Logged

whats the current setup? and isnt the amp a mono block?

Quad L Handyman services

Back to Top

skiflyer45

Member - Posts: 33

Joined: August 28, 2002

Location: United States

Posted: November 30, 2003 at 10:19 PM / IP Logged

i have two boxes....ca. 1.2cu each, level and bass boost at full, each sub to one output.

Headunit is a clarion.

I'm not sure if there is another way to wire it? Do you know?

Back to Top

bfog99

Copper - Posts: 212

Joined: June 04, 2003

Location: United States

Posted: November 30, 2003 at 10:33 PM / IP Logged

That is the only way for you to wire it. What if you play with the corss over points?

Back to Top

wvsquirrel

Gold - Posts: 1,237

This member has made a donation to the12volt.com. Click here for more info.

Joined: July 27, 2002

Location: Florida, United States

Posted: November 30, 2003 at 10:46 PM / IP Logged

Deffinately DO NOT attempt a bridge with that amp. It has 2 sets of speaker outputs, but they are really the same channel and are already Internally Bridged.

Try raising the sub level output from the headunit if available.

Squirrel

"No more Cpt. Kirk chit chat"

If its too loud, then you're too old

Donate to the12volt.com

Back to Top

skiflyer45

Member - Posts: 33

Joined: August 28, 2002

Location: United States

Posted: November 30, 2003 at 11:15 PM / IP Logged

what are the cross-over points???

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

JBL 300.1 and 2X JL w0

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.