fading to non-fading preout

I've got a kenwood kdc-mpv619, its got front and rear preouts but no sub....is there any way to make one of them a non-fading preout? thanks

I looked at the manual for this unit.  It does not have the non-fading feature available.

I am afraid stevdart that you are out of luck with the feature that you want with this unit. A Pioneer unit equivilent to yours does offer this feature.      Be careful whose advice you buy, but be patient with those who supply it.

A good solid bet is a outboard multicapacity unit like the Cadence QXR1. It is a line driver, crossover, phase shifter and has a dedicated dash mounted sub level control. It is a simple and easy upgrade for you. You need control of your sub system, another option would be one of the many Audio Control products.Top Secret, I can tell you but then my wife will kill me.

hey, this cadence qxr1, how does it work? what do you connect it to? 1990 Honda Civic HB:

Clarion DXZ545MP H.U.

2- 6.5" Power Acoustik interiors

Diamond Audio 600.1 amp

Diamond Audio 15" M6MKII

Pyramid PB881X 4 CH. Amp

i'm gonna pick up a crossover, when hooking up the power and ground can i use the same power cable for my amp and just soder on another end and split it to two lines, or do i need to run another power cablethanks

Sorry for the delay guys, I'm on the west coast and I have to get the shop running before I can reply. The QXR1 is a for all intents and purposes a crossover. You would plug the front preout into it and then it splits it into High pass and low pass, line drives it, provides phase shifting for the subs and a dash mounted level control. So it has one pre in and two preouts, high pass for the front (which still fades) and low pass which does not. You would wire it in right before the front amplifier. For the second post it can be wired to an existing amplifier for power and ground.Top Secret, I can tell you but then my wife will kill me.