Amp for Brahmas

I am looking for an amp 2 power 2 12" Brahmas.  I want around 600, if not more watts RMS going to each sub (they will be sealed), and I would prefer to run this setup at 2 ohms.  The amps I have looked at pretty closely have been the JBL 1200.1 and Phoenix Golds Ti 1000.2.  (I know there is a huge price and quality difference there).  I like the JBL because I ran a 15" Brahma ported on it, and it sounded fine.  However, I always want better (doesn't everyone though?) and I am therefore looking at higher quality amps. 

 I am looking to keep the price tag down below 700, the less the better obviously.  I am not looking to compete here, just want something that sounds good.  However, I dont want to spend an extra 300 because "specs" say it will sound better.  I am not rich by any means, which is why the JBL looks so tempting, but I dotn want to invest over 700 bucks in bass,  and be left with a cheesy amp to push em. 

Thanks for your guys help, all suggestions are more than welcome.

Evan

You might put this Planet Audio P2250D in the mix.  It should power those Brahmas very well.

I have ran Planet amps and Have Tortured them to the Brink of Death...They are tough amps and sound great...

Plus if you do kill one Planet has a great return policy set up with their dealers...

Making the World A Louder Place

Ravendarat, what model was that amp? How many watts? Not enough power for you or what was the problem?

I love my planet audio mids/tweets. They really do an excellent job of reproducing music the same as the artist made it.

I cant remember the model number, it was like 4 years ago and like I said, I only kept it for mabye 2 weeks. I had switch from my ix402 impulse kicker amp to this amp which was suposed to do about double the power and it just didnt do it. If it did the same kinda power as the kicker I would evenbe surprised. And to top it all off the first one I had died after about 4 hours, but that just happens. I also remember thinking the thing sounded very muggy. If I remember right I think I had an old kicker comp that was dual 2 ohm so I had it wired in 4 ohm because the amp was only stable to 4 ohms bridged but as I said, that was a long time ago.