'92 Toyota 4runner factory amp

Home / the12volt's Install Bay / Car Audio / '92 Toyota 4runner factory amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Deathlock

Member - Posts: 5

Joined: August 12, 2003

Posted: April 07, 2005 at 1:51 PM / IP Logged

I installed a new aftermarket radio. I disconnected the factory hardness from the factory amp. Everything is connected. But my back speakers don't work only the tweeters. Front ones are working. Double checked all the wiring and everything is fine. Even installed the factory radio back on and the back speakers work. But not with the new radio. Can anyone tell me what I am doing wrong? Thanks!

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: April 07, 2005 at 2:25 PM / IP Logged

Find the black and pink wires on the power factory plug. Hook BOTH of them to your remote turn on lead ( blue/white ). The rear 5 1/4s are amplified, this will turn the factory amp on.

Deathlock

Member - Posts: 5

Joined: August 12, 2003

Posted: April 07, 2005 at 3:07 PM / IP Logged

Thanks TCSS!!!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'92 Toyota 4runner factory amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.