enclosure specs?

Home / the12volt's Install Bay / Car Audio / enclosure specs? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rwise14

Member - Posts: 2

Joined: June 23, 2005

Location: United States

Posted: June 23, 2005 at 4:02 PM / IP Logged

I have a 1990 chevy work van that I want to build a sixth order box for. I'm putting in 2 dual voice coil audio pipe 12's model TXX-AP12BL woffers. Space is no problem. Can anyone help?

old timer needs help

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: June 23, 2005 at 8:02 PM / IP Logged

We're diligent here...but help us out with some links to the specs. It sucks when we have to go searching all over the internet for the sake of helping somebody out. Subs and amp, and anything else involved in the install, please.

And, by the way, space is ALWAYS a problem in a vehicle...even in a chevy work van. But we'll work with it. (By the sounds of it, WORK isn't what that vehicle is going to do... enclosure specs? -- posted image. ...)

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

rwise14

Member - Posts: 2

Joined: June 23, 2005

Location: United States

Posted: June 27, 2005 at 1:23 PM / IP Logged

Sorry about that here are a few specs that will help. The subs are audiopipe 12's dual voice coil2x2 ohm rated at6 800w and max 1600w. Frequency response 25 hz-800 hz sensitivity 96 db/w/m. The amp is a Boss 775 2 ohm stable 950w @ 2 channel. It also has built in crossover.

old timer needs help

Bigsingh

Copper - Posts: 204

Joined: March 26, 2005

Posted: June 27, 2005 at 4:56 PM / IP Logged

throw us some theile small parameters. fs, qts etc.....

6* Rockford T2's

6* POWER AMPs

BLACK CORRADO

BAANNGGIINN

stevdart

Platinum - Posts: 5,816

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: June 27, 2005 at 7:49 PM / IP Logged

Get rid of the Boss amp and get yourself a mono amp (example: http://www.thezeb.com/p-Phoenix-Gold-Octane-R-R15.0:1-102960.htm). You want to be able to put those two subs together for a total 2 ohm load. You can't bridge a 2 ohm load onto a two channel amp (it's 2 ohm stable per channel). And don't forget the links.

http://www.sounddomain.com/shop/wooferwizard.pl

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

enclosure specs?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.