2004 toyota tacoma stereo system

Home / the12volt's Install Bay / Car Audio / 2004 toyota tacoma stereo system (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bigbassboi

Member - Posts: 19

Joined: February 12, 2006

Location: Canada

Posted: February 12, 2006 at 4:05 PM / IP Logged

i am considering running one mtx 9500 15 " driver in the xtracab..... Amplification.... 1 mtx ta 81001 mono block rated @ 1500 w rms @ 1 ohm stable..... i wanted some help on box design and setup for a enclosure to fit this beast in... i have roughly 50" width, 20" height and 12 " depth... can you help me out with this.....

bigbassboi

Member - Posts: 19

Joined: February 12, 2006

Location: Canada

Posted: February 12, 2006 at 9:13 PM / IP Logged

looking to purchase a single 15 " driver btween 500 and 700 dollars... plan on running between 800 - 1000 w rms in a ported enclosure in an extra cab toyota tacoma.... any ideas or suggestions..... something that maintains somewhat decent sq and good output......

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 toyota tacoma stereo system

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.