new gm with out a chime module

Just tell him you will do it but not warantee it unless you do it the way you normally do and know it works. 99 Blazer LT.   Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

    * Vehicle Customization Menu Options:       ( Most Cavaliers, Sunfires and other base models do not offer most, if any of these features.       Check the vehicle owner’s manual to see available features. )     * Displays current settings     * Oil life monitor reset     * Tire inflation monitor reset     * Delayed headlamp illumination     * Automatic door lock and unlock     * Remote visual/audible verification of remote lock/unlock     * Enable/Disable content theft     * Enable/Disable trunk lock shock sensor     * Short or long horn with remote lock/unlock     * Key fob transmitter programming The radio is used as a control panel to communicate with the vehicles computer for the customization of certain “convenience features”. All features work and remain at current settings with the factory radio removed, but can only be customized and/or reset by an authorized service center. More important than the above features and chime, there is no switched 12vlt. power supplied in the radios plug, so it will need to be sourced somewhere else such as the factory fuse panel. A 10A to 30A fused accessory power source is recommended. Depending on the vehicle there are several choices in the factory fuse panel, such as the sunroof or windshield wipers.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

In Canada it is also classed as a safety device, meaning it is illegal to remove this from the circuit. This is due to the fact that seatbelts are mandatory and the seatbelt warning chime, well guess where it is located as well. So the hard headed customer needs to settle down and realize that it is a must instead of a maybe.Top Secret, I can tell you but then my wife will kill me.

Tell the customer to go have it done somewhere else if he doesn't want it done right. This is the type of customer nobody needs and is just as likely to come back later and expect you to do it right the way you suggested for free once he discovers the downside. Getting a few bucks for a bad and incorrect install that has your name on it just isn't worth it. Let him be someone else's problem.sparky

the thing you have to remember is that  YOU set the benchmark for the quality and integrity of your install work, not your customer....Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Thats what my installers told me. I've learned the hard way that the customer is not always right...Sebastion K.

So Cal Audio Concepts