wiring up a 4ohm dvc

Home / the12volt's Install Bay / Car Audio / wiring up a 4ohm dvc (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

isysopi

Member - Posts: 2

Joined: January 03, 2003

Location: United States

Posted: January 03, 2003 at 9:11 AM / IP Logged

What would be the best way to wire up a bridged Sony XM-2150gsx to a memphis studio 12" 4ohm dvc. The sony isnt stable at 2 ohm mono so is it possible to wire up a 4ohm dvc to a mono amp and still get an impedence of 4ohms?

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: January 03, 2003 at 10:07 AM / IP Logged

I belive if you wire the voice coils in series with each other and bridge the amp you should have a 4 ohm load.(I think) Brian

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring up a 4ohm dvc

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.