amp problem

Home / the12volt's Install Bay / Car Audio / amp problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

JTMann16

Member - Posts: 22

Joined: November 23, 2002

Location: United States

Posted: January 15, 2003 at 9:12 PM / IP Logged

does anyone know where the wire for the punch bass remote on a Rockford Fosgate 700X plugs into? It came w/ a dial type remote to adjust the bass and a phone cable wire, but i cannot figure out where i am suppose to plug it into the amp. Do i have to buy something else like an adapter or is there just not suppose to be a remote for the 700X? if anyone knows, please help, thanks

Each to his Own...

ken wood

Member - Posts: 2

Joined: January 16, 2003

Location: United Kingdom

Posted: January 16, 2003 at 2:39 PM / IP Logged

As far as I am aware, the amp gain dial is, as you say a plug in via a phone type cable! May be only the Power series amp that come with these controls.

ViperATC5

Copper - Posts: 202

Joined: January 17, 2003

Posted: January 17, 2003 at 11:06 PM / IP Logged

to my knowlege, both the punch and the power series have the remote bass knob - look at your amp carefully, you will see a port where the phone cord will plug into

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.