dodge intrepid speaker wire routing

Home / the12volt's Install Bay / Car Audio / dodge intrepid speaker wire routing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

big-e

Member - Posts: 16

Joined: November 06, 2002

Location: United States

Posted: January 19, 2003 at 6:50 PM / IP Logged

I having trouble routing the wire to the speakers in the door. Any suggestions would be great.

colguin

Member - Posts: 7

Joined: January 20, 2003

Location: United States

Posted: January 20, 2003 at 9:52 PM / IP Logged

what year intrepid do you have? I rewired my 95 intrepid and I had to remove the bottom part of the dashboard to feed the wires through. It was quite a pain in the rear. The parking brake is in the way and it would help if you had smaller hands. Inbetween the door and the car you'll have to pull up the rubber wire covering to help you feed the wires through. When removing the door panel, after removing the screws, pull the panel upwards and then out, and disconnect any harnesses or just have someone hold it while you pull the wiring through.

Chris O.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dodge intrepid speaker wire routing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.