remote start, 96 plymouth voyager

Home / the12volt's Install Bay / Car Security and Convenience / remote start, 96 plymouth voyager (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

95z28

Member - Posts: 2

Joined: December 27, 2007

Posted: December 27, 2007 at 1:08 PM / IP Logged

I am installing a remote starter manufactured by autostart. I have hooked all the wires up except the parklights. are these needed to make the system work. I also did not kook up any of the accesory harness. And I am confused about the hood pin. How dos it work and does it need to be hooked up for the system to work.

The light on the antena flashes when the ignition is turned of and stops flashing when the ignition in on or running.

I also am confused hoe to program the dam thing. I tried starting it with the control and nothing happens.

It is a 1996 plymouth voyager with no power options at all.

I would greatly appriciate the help.

Thanks

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 28, 2007 at 8:16 AM / IP Logged

Hood pin is a required hook up for this unit. You need it to program the unit and the tach. Also, without the parking lights hooked up it will be hard for you to see whether or not your in programming mode unless your familiar with the unit and know how to count the clicks coming out of the CPU.

Hook up these two connections to make life easier for yourself.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

95z28

Member - Posts: 2

Joined: December 27, 2007

Posted: December 28, 2007 at 1:22 PM / IP Logged

could I just hook up a test light or volt meter to the yellow parking light wire coming out of the brain and use the flashes form the test light. The parking lights are a pain on this thing and i dont want to deal with them if at all posible.

usabuilt

Copper - Posts: 161

Joined: September 11, 2007

Location: United States

Posted: December 28, 2007 at 3:40 PM / IP Logged

you don't need the parking lights for it to function properly.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start, 96 plymouth voyager

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.