2002 dodge stratus remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2002 dodge stratus remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jankyrob

Member - Posts: 14

Joined: December 05, 2007

Location: Connecticut, United States

Posted: December 30, 2007 at 6:04 PM / IP Logged

I installed a bulldog deluxe 500 remote start and when I plugged the harness in the module it did nothing. According to what read in the forums I have double checked the wiring and seems ok. I cannot get the led to blink or horn to honk. Any help will be helpful.

Thanx

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 30, 2007 at 6:57 PM / IP Logged

Where did you ground the system ? On the Dodge you have to ground to the frame not to the part of the dash that's part of the lower dash shroud.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

jankyrob

Member - Posts: 14

Joined: December 05, 2007

Location: Connecticut, United States

Posted: December 30, 2007 at 9:36 PM / IP Logged

I will try this in the morning. I believe I grounded the wires to the dash were there was bare metal. I thought this would be a suitable place. Please let me know if this would be ok? Thanx for the very fast reply

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: December 31, 2007 at 11:42 AM / IP Logged

Double-checked how? Visually, or by testing the wires?

The best way would be to go right to all the harnesses going into the brain, and test all of the wires right there, for proper function.

jankyrob

Member - Posts: 14

Joined: December 05, 2007

Location: Connecticut, United States

Posted: December 31, 2007 at 1:10 PM / IP Logged

I checked at the harness and at the brain. I was looking at the manual and I believe I did not connect the 12 volt red wire @ the h2 harness. I thought it would be for the lights only. Let me hook this up and see what happens.

Thanx for the reply

jankyrob

Member - Posts: 14

Joined: December 05, 2007

Location: Connecticut, United States

Posted: January 01, 2008 at 3:09 PM / IP Logged

Okay I connected the other red wire on the h2 harness and grounded the cut portion like the manual told me and nothing happens. The led's do not blink and the horn does nothing. The book told me to turn the car to on three times and on the third time to leave it on the on position the press the program button (nothing). Any suggestions?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 dodge stratus remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.