python door harness

Home / the12volt's Install Bay / Car Security and Convenience / python door harness (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bryan secoy

Member - Posts: 1

Joined: May 23, 2008

Location: Virginia, United States

Posted: May 23, 2008 at 5:08 PM / IP Logged

I'm trying to hook up the door harness for the Python 460HP to my Acura RSX. I have found that the cars wires are

Power Lock: WHITE/ Blue (Type-B), Power Unlock: WHITE/ Green (Type-B) I have physically found the wires, but I'm not sure how to hook up this harness. It has 5 wires "Not including the 3 wires that run back to the alarm brain. I can't find what the wires are for exactly. Here is what is stamped on it.

Violet/Black: Lock/Unlock Normal Open #87

GREEN/ Black: Lock Output #30

WHITE/ Black: Lock Normaly Closed #87A

Blue/Black: Unlock Output #30

BROWN / Black: Unlock Normally Closed #87A

Can someone help me figure this out. Thanks!

Back to Top

techman93

Silver - Posts: 591

Joined: October 28, 2006

Location: Pennsylvania, United States

Posted: May 23, 2008 at 7:25 PM / IP Logged

bryan secoy wrote:

I'm trying to hook up the door harness for the Python 460HP to my Acura RSX. I have found that the cars wires are

Power Lock: WHITE/ Blue (Type-B), Power Unlock: WHITE/ Green (Type-B) I have physically found the wires, but I'm not sure how to hook up this harness. It has 5 wires "Not including the 3 wires that run back to the alarm brain. I can't find what the wires are for exactly. Here is what is stamped on it.

Violet/Black: Lock/Unlock Normal Open #87

GREEN/ Black: Lock Output #30

WHITE/ Black: Lock Normaly Closed #87A

Blue/Black: Unlock Output #30

BROWN / Black: Unlock Normally Closed #87A

Can someone help me figure this out. Thanks!

Hook up violet/black #87 to a solid ground

Hook up GREEN/ black to WHITE/ blue wire in vehicle

Hook up blue/black to WHITE/ green wire in vehicle

Do not connect WHITE/ black or BROWN / black to anything tape ends up. That is how to wire a negative pulse door lock setup.

The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python door harness

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.