00 sts memory seats

i just installed a crimestopper cs-2016.dp.fm with a int-sl bypass module hooked up through data link on a 2000 seville sts. the int-sl states that it will work the memory seats through unlock. my question is how does that work because when i enter it always says driver 1. one other issue i see is that the trunk release will only work from the remote if the doors are locked...

I haven't used that module before, but I've used others. They should be more clear in the instructions. All aftermarket remotes will always be Driver 1. When Driver 2 enters the car, they'll have to push the 2 button on the door panel to get their settings back. As far as the trunk, I don't know. But maybe you could put a tester on the wire going into the module, and make sure that the Crimestopper is really triggering the module when the doors are unlocked.