omega al 100f car alarm w/ stock keyless

Home / the12volt's Install Bay / Car Security and Convenience / omega al 100f car alarm w/ stock keyless (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

xarons21

Member - Posts: 6

Joined: August 30, 2004

Posted: July 21, 2008 at 3:08 PM / IP Logged

Hey guys, I would like to apologize before hand if this is a dupe post, I did a search and didn’t find anything similar. I have the Omega AL-100F unit that is a full feature car alarm but utilizes the stock keyless entry system. I know all the basics but have a question about the WHITE 6-PIN connector if you have any knowledge of this unit in particular can you please help, I don’t know all these override things and don’t want to mess up the unit during install, any help would be awesome!!!

I drive a 2008 Lancer GTS with navi

Is this unit as good as the DEI units??

Also, Can I use DEI shock sensor/window roll ups/motion sensors??

Back to Top

xarons21

Member - Posts: 6

Joined: August 30, 2004

Posted: July 22, 2008 at 9:35 PM / IP Logged

ok I have figured out this first part, but have another question if ANY of you guys know this....

I lock my car, and it lock, all good, alarm armed.... when I unlock right away it disarms the alarm fine, BUT if I leave the car LOCKED for a long period of time, it seems like the car forgets there is an alarm, and when I unlock it unlocks the doors, but doesnt disarm the alarm.... so if you have ANY suggestions at all PLEASE let me know.

ALSO will the DEI sensor units work with this omega unit?

Thanks!!!

Back to Top

xarons21

Member - Posts: 6

Joined: August 30, 2004

Posted: July 23, 2008 at 11:41 AM / IP Logged

I lock my car, and it locks, all good, alarm armed.... when I unlock right away it disarms the alarm fine, BUT if I leave the car LOCKED for a long period of time, it seems like the car forgets there is an alarm, and when I press unlock it unlocks the doors, but doesnt disarm the alarm.... so if you have ANY suggestions at all PLEASE let me know.

P.S. The unit is the AL-100 the unit you add to upgrade your stock keyless to a full fledged alarm.

ALSO will the DEI sensor units work with this omega unit?

Thanks!!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

omega al 100f car alarm w/ stock keyless

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.