the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

autopage RS-650 plus door locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
sean6574 
Member - Posts: 2
Member spacespace
Joined: March 15, 2003
Location: United States
Posted: March 16, 2003 at 2:59 PM / IP Logged  

I recently hooked up an autopage rs-650 plus.  Remote start and alarm work well but the keyless entry does not.  I have a 2000 contour with positive door switching locks.  When I hook up the lock wire from the system the doors stay locked.  The wire tests +12V constant is it supposed to be like this or do I have a defective unit?  If so I was thinking of using the second channel (trunk release) to lock the doors will this work?

Thank You

draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 16, 2003 at 9:01 PM / IP Logged  
what is the setup for the door locks on your unit??
colors and number of wires....
are these the wire colors that you are using for the door locks in the car??
Power Lock WHITE/ GREEN DRIVER KICK #202
Power Unlock YELLOW /GREEN PANEL
david
sean6574 
Member - Posts: 2
Member spacespace
Joined: March 15, 2003
Location: United States
Posted: March 17, 2003 at 12:46 AM / IP Logged  
Yes those are the wires I am using.  It says hook the blue wire to the lock wire and the green to the unlock wire so I have the green wire hooked up to the YELLOW /GREEN wire and the blue to the WHITE/ green in the driver kick panel.
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 17, 2003 at 6:18 AM / IP Logged  
are your wires going from the alarm stright to the door lock wires??
is the port on the alarm for the door locks a 3 wire port??
green red blue
i think you will need some relays
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 17, 2003 at 8:37 AM / IP Logged  
when you read this post, look to the left and you will see a listing for "General info"
click on diagrams and go to 3 wire positive door locks
wire them up like that and that should do it for you.
david

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer