99 grand cherokee, alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 99 grand cherokee, alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jackiecard

Member - Posts: 5

Joined: December 22, 2008

Location: New York, United States

Posted: December 23, 2008 at 10:23 PM / IP Logged

there a brown and yellow in the remote start but i dont know exactly where exactly it would be installed in my truck 99 jeep grand cherokee. it says the brown goes to ON and the yellow to the START

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: December 23, 2008 at 10:38 PM / IP Logged

brand/model of remote start?

jackiecard

Member - Posts: 5

Joined: December 22, 2008

Location: New York, United States

Posted: December 26, 2008 at 7:44 PM / IP Logged

the alarm is spy, the yellow wire and brown has to united to the truck or just the one.

jackiecard

Member - Posts: 5

Joined: December 22, 2008

Location: New York, United States

Posted: December 26, 2008 at 7:49 PM / IP Logged

i have a diagram which is for the door trigger and it shows that the wires goes to 4 door pins but im not sure where they go its for a 99 jeep grand cherokee

rdrich

Member - Posts: 1

Joined: December 26, 2008

Location: Indiana, United States

Posted: December 26, 2008 at 8:23 PM / IP Logged

I need wiring information on a 2002 Kia Sportage, I'm wanting to install a remote starter w/keyless entry. Thank you

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: December 27, 2008 at 12:05 AM / IP Logged

rdrich, try the Vehicle Wiring search feature toward the top of the page.

jackiecard, can you scan the wiring diagram from that manual? Also, what(if any) kind of parts are you using for the door lock control/immobilizer bypass?

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

jackiecard

Member - Posts: 5

Joined: December 22, 2008

Location: New York, United States

Posted: December 29, 2008 at 6:35 PM / IP Logged

im following the diagram that is in the link below, which is in the right and is negative and the only dought that i have is where does the black cable has to be connected to because i connected all the other wires. does any body know. this is for a 99 jeep grand cherokee

http://64.85.6.129/extrainfo/diagrams/14301_GRAND-CHEROKEE_GRAND%20CHEROKEE%20PARKING%20LIGHT%20DIAGRAM.pdf

jackiecard

Member - Posts: 5

Joined: December 22, 2008

Location: New York, United States

Posted: December 29, 2008 at 7:49 PM / IP Logged

http://64.85.6.129/extrainfo/diagrams/14301_GRAND-CHEROKEE_GRAND%20CHEROKEE%20DISARM%20DIAGRAM.pdf

i need some help with the diagram because i connected all the wires but i dont know where the black wire should be connected to. which says to connect fasd wire on the remote start unit but i dont know what it means

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 grand cherokee, alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.