viper 5901 problem

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

darkstar752

Member - Posts: 5

Joined: October 03, 2006

Location: United States

Posted: February 08, 2009 at 4:03 PM / IP Logged

I am installing a Viper 5901 in a 2004 Dodge Ram 3500 Diesel. Everything was going fine until the end. I have the alarm powered and grounded, and the neutral safety switch is grounded and hooked up. I went to plug the RED / white and RED / black into the 12volt wire and they kicked on. The RED / white turned the ignition on and the red black kicked the starter on, without the key. The only way to turn it off was to disconnect the wires. Does anyone know why this is happening, I have done plenty of remote starts and this is a first for me. Thanks for your help.

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: February 10, 2009 at 12:44 PM / IP Logged

That's because your installation procedure is wrong.

Start by disconnecting all harnesses from brain.

Connect all necessary wires to vehicle - double check to be sure.

Connect 12 pin harness to module first.

Now connect the rest of the harnesses.

Never wire a module to vehicle while it's connected unless if the wires are soldered to the board in that case connect the ground first..

Prepare your future. It wasn't the lack of stones that killed the stone age.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.