best kill switch for 95 chevrolet lumina

Hi everybody... First, thank you for letting get into the forum is very cool everything and very insteresting. Second, sorry if i post it wrong the message, feel free to move it. Now the doubt, I have a Chevrolet Lumina 1995, and i want to install a killswitch, but i dont know wich one to install, or what is the best to install, either a inmobolizer or simple killswitch from the ignition switch... I dont know how to do it, and i've look in every forum and nothing. Can anyone help me? Thank's to all... Greetings From Mexico.

Hola, the best killswitch/antitheft for you to do would be to just add a starter kill. your lumina already has a fuel fump anti-theft built in with the GM vats system. it it possible to add an additional immobilizer as well but it would be overkill in your situation. Are you in the north, or central? the most common thing will be to just tow the car away. you could make it a little safer with an added starter kill...but no matter what...it could still be towed off.

i'm in the north of the republic of Mexico, nearby the border with El Paso... And yes i would like to add a starter kill, but how can I do it, any diagram or conection drawing or something to install it myself? Thanks.

ahh yes, good old Juares. your not far from me at all. the most common thing for thieves to do around where you live is to just tow a car away. none the less some type of security is better than none. if you look at the top of the page at "relays" there are several types of starter kill setups you could make, diagrams and everything are there.

thanks Ckeeler... I'm looking at the diagrams of the relays, there several, now i dont have a problem to get the components and make the circuit myself, but how can i connect it to the car, i mean, where do i make the cuts of the wire o how... Thanks again..

Thanks loneranger... I can open the board under the sterring column, because i have to remove the air bag and its a lot of problem, if i locate the wire's, and could conect everything, now i'm watching the diagram's for the killswitch, but the one with switch requeries two relay's, i have allready one, now there's a diagram to the killswitch for a touch killswitch, the one that touch one bolt and make negative with other metalic place.. Thanks again..