door unlock problem

Home / the12volt's Install Bay / Car Security and Convenience / door unlock problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

frank1cangri

Member - Posts: 6

Joined: April 19, 2009

Location: California, United States

Posted: April 19, 2009 at 10:47 PM / IP Logged

i have a 96 toyota camry LE and i installed an alarm but i have a problem, when the door is open i activate the alarm and the door locks close, and when i disarm the alarm the door lock open, here is my problem, when i close the door and activate the alarm the door locks close, but when i disarm the alarm the door lock doesn't open, can someone help me please

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 20, 2009 at 2:52 AM / IP Logged

Your lock wire or main alarm grounds might be connected to the dome light activator which only shows ground when door is open. All the alarm ground wires should be firmly connected to a good ground, bet that's the problem.

frank1cangri

Member - Posts: 6

Joined: April 19, 2009

Location: California, United States

Posted: April 20, 2009 at 9:49 AM / IP Logged

I'll give it a shot, thanks door unlock problem -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door unlock problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.