viper 5900 remote start

i have a quick question for everyone I just installed a 5900 in a 94 lexus gs300 and for some reason when i go to start the car its like nothin happens on the first turn of the key its on the second turn that the car starts?? but if i remote start the car everything works fine. I am lost and have checked all my wires and everything is fine. just curious if anyone has ever had this problem?? thanks to all who can help out

 You have to actually crank the car twice for it to start...? What happens when you crank it the first time(car dash lights come on and just doesnt crank...car cranks and cranks but does not start...Or nothing at all,no lights- no crank...?) Where you up by where ignition harness attaches to cylinder.Make sure harness is plugged in tight. Have you checked voltage during the first turn no start...?M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tommy... wrote:  You have to actually crank the car twice for it to start...? What happens when you crank it the first time(car dash lights come on and just doesnt crank...car cranks and cranks but does not start...Or nothing at all,no lights- no crank...?) Where you up by where ignition harness attaches to cylinder.Make sure harness is plugged in tight. Have you checked voltage during the first turn no start...?

car will attempt to crank for not even a half second and then just stop dash lights and everythin turn on like regular. all my connections were made further down away from the key cylinder ill double check but pretty sure thats not the problem? im a little new to the alarm thing so how would i check the voltage during the first turn what wire would i check both sides of the starter wire