Fuse help

Home / the12volt's Install Bay / Car Security and Convenience / Fuse help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

erijef1

Member - Posts: 2

Joined: March 27, 2003

Location: United States

Posted: March 28, 2003 at 4:16 PM / IP Logged

I'm installing a APS996. If the manual simply states to use a fused 12 volt constant for the relays, how many amps should it be and where should I get the constant from. Some relays call for two fused 12 volt constants; can they be the same constant on the same relay?

Thank you,

Jeff

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 28, 2003 at 6:39 PM / IP Logged

i would use a 10 amp min. and get if from the battery. you can use a empty constant 12v in your fuse box if you have one. dont use your dome light wire or something like that.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Fuse help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.