ultra start g11 remote start, 2004 ram

Home / the12volt's Install Bay / Car Security and Convenience / ultra start g11 remote start, 2004 ram (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

catman222

Member - Posts: 3

Joined: December 17, 2009

Location: New Brunswick, Canada

Posted: December 17, 2009 at 4:32 PM / IP Logged

I have an ultra start g11 remote start and it only has one accessory output for my 2004 5.7 ram 1500 , i was wondering if this would work for relay wiring

tap acc1 from remote start to pin 86 and 87

pin 85 to ground when running on remote start

pin 30 to 2nd acc

Could someone please let me know if this would work

Thanks

Back to Top

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: December 17, 2009 at 4:38 PM / IP Logged

I wouldn't connect both 86 and 87 to the ACC output, I would only connect Pin 86 to it. I would connect Pin 87 straight to your 12vdc source. You don't want all the current from the 2nd accessory running through the 1st accessory relay.

Kevin Pierson

Back to Top

catman222

Member - Posts: 3

Joined: December 17, 2009

Location: New Brunswick, Canada

Posted: December 17, 2009 at 4:45 PM / IP Logged

Ok thanks for the quick reply

Back to Top

catman222

Member - Posts: 3

Joined: December 17, 2009

Location: New Brunswick, Canada

Posted: December 18, 2009 at 7:37 PM / IP Logged

I am installing a remote start on my 2004 ram 1500 and i need to hook a ground while running wire from my bypass module and also the second acc relay to the remote start ,could someone please tell me which way to put my diode to isolate second acc gwr

Thanks

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 18, 2009 at 8:34 PM / IP Logged

grab 1amp diodes 1N400x series diodes. since you only want the ground to flow through, place the silver band of the diode towards the GWR wire.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ultra start g11 remote start, 2004 ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.