automate am6

Home / the12volt's Install Bay / Car Security and Convenience / automate am6 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tech33

Member - Posts: 2

Joined: August 24, 2010

Location: Alaska, United States

Posted: August 24, 2010 at 12:14 AM / IP Logged

bought a 2003 chevy tahoe with automate am6 preinstalled. lock/unlock works and can hit * button twice and vehicle will

stay running as programmed but will only crank over but not catch when * i pushed twice like programmed. any ideas?

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 24, 2010 at 3:59 AM / IP Logged

Place the key in the ignition switch, do not turn the key on, just set it in the switch. Press the button twice. Does it "Catch" now?

Back to Top

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 24, 2010 at 4:02 AM / IP Logged

if it still does not start, turn the key to the run position, and try it again.

Back to Top

tech33

Member - Posts: 2

Joined: August 24, 2010

Location: Alaska, United States

Posted: August 24, 2010 at 8:43 PM / IP Logged

tried these already. somebody mentioned module for gm install maybe bad?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

automate am6

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.