2008 saab 9 7x aero

Interested in some wiring information for a 2008 Saab 9-7X AERO. This is basically a Trailblazer SS mechanically, however elctrically I'm unsure.

Interested in installing a remote start, Avital 4003  with DEI Xpresskit DLPKGM. Will these allow me to use the original key fob, and will the bypass kit operate the heated seats and defroster?

Thanks for any help you can provide.

Vehicle Supplement According to that it will not control the heated seats on the vehicle. What do you mean by use the original keyfob? For activation of remote start? Typically the r/s will have a r/s enable input and you can select how many pulses it takes to activate it. For example you can hook it up to the lock wire and when you press lock 2x it will trigger remote start.

Thanks so much for the information. The key and remote are one piece for this vehicle, so I cannot detach the remote from the key This is why I want to re-use the factory remote as the remote for the RS.

Also I decided to go with the Avital 4003 and the Xpresskit XK09 with DLPKGM V 2.0 firmware, can you get the same type of spec sheet for that as you did for the one you linked above?