clifford remote reprogram

Home / the12volt's Install Bay / Car Security and Convenience / clifford remote reprogram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mrjoshua398

Member - Posts: 3

Joined: January 29, 2011

Posted: January 29, 2011 at 2:02 PM / IP Logged

I have a Clifford Intelliguard 7000. I have a new remote for it and can reprogram the arm/disarm. My question is about programming the remote with my remote start. I have a manual trans. and there is one button on the remote to arm the remote start then another button to remote start the car. The manual doesn't tell you how to program the button on the remote to arm the remote start. Hopefully someone knows what the hell I'm talking about. I'm stuck and DEI is horrible in the customer service department.

Thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 30, 2011 at 3:34 AM / IP Logged

PM me with your email address and I'll try to email you the owner's manual.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 30, 2011 at 3:39 AM / IP Logged

Actually it's here in the downloads section, installation guide.

mrjoshua398

Member - Posts: 3

Joined: January 29, 2011

Posted: January 30, 2011 at 12:05 PM / IP Logged

I see the manual but it doesn't explain how to program that button combo in. Right now in my current remote if I press the trunk open button that activates the "Manual Trans./Remote start". Then to start the car I hit the star button. On the new remote I would have to program that "Manual Trans./Remote start" feature to one of the buttons on the new remote. It doesn't say anything about programming that feature. Help! lol.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 30, 2011 at 3:29 PM / IP Logged

You can change the functions to what you want.

mrjoshua398

Member - Posts: 3

Joined: January 29, 2011

Posted: February 04, 2011 at 10:54 AM / IP Logged

Basically what I'm saying is I don't know the column and row combination to punch into the plainview2 inorder to program that manual trans./remote start arming on the remote.

For example: To program the arm/disarm you push the blank button 4 times and then the * once then push the button on the remote.

So how many blanks and how many *'s for the manual trans./remote start? That is what I'm looking for.

Any help would be appreciated. Hard to believe no one else has had this issue.

Thanks.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 05, 2011 at 5:13 AM / IP Logged

Push Clifford or G5 or side button (depending on your remote then) then the normal button for rem start manual enable, might have to do this twice to store it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford remote reprogram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.