2006 crown victoria, alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2006 crown victoria, alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

AciDFluX

Member - Posts: 2

Joined: February 15, 2003

Location: United States

Posted: June 10, 2011 at 5:36 PM / IP Logged

I would like to install a remote start alarm this weekend in my 06 crown victoria police interceptor. I've been looking all over the net and this forum for a diagram of wires and locations but haven't found anything except for 05. Any assistance is greatly appreciated with this request.

i am an idiot

Platinum - Posts: 13,673

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 10, 2011 at 7:38 PM / IP Logged

http://techservices.audiovox.com/AccessRequest.aspx

kreg357

Platinum - Posts: 7,787

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: June 10, 2011 at 8:33 PM / IP Logged

Looks like 2005 thru 2008 are the same. Bulldog Security has it listed with pictures for the ignition switch release. http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp.

Soldering is fun!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 12, 2011 at 8:03 AM / IP Logged

Just loaded it to Downloads/Manuals section.

AciDFluX

Member - Posts: 2

Joined: February 15, 2003

Location: United States

Posted: June 13, 2011 at 3:37 PM / IP Logged

I'm installing a viper remote start in my 06 Crown Vic. I noticed there are 2 accessory/blower wires from the factory. The viper unit I have only has 1 accessory wire and 2 ignition wires. Should I be safe wiring the 2 factory wires together to the 1 accessory wire on the relay satellite? Also what about the ABS wire that will make the ABS light flash unless you hook it up?

Thanks for any expertise that can be provided.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 crown victoria, alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.