lock/arm '06 f350

Home / the12volt's Install Bay / Car Security and Convenience / lock/arm '06 f350 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

griptwister

Member - Posts: 2

Joined: March 20, 2012

Location: United States

Posted: March 21, 2012 at 12:12 AM / IP Logged

Is there a problem anyone could envision with pulsing the Red and Yellow wires from the keypad on this truck at the same time with the negative lock wire from a CA671 alarm to lock the doors and turn off dome light immediately when arming?

griptwister

Member - Posts: 2

Joined: March 20, 2012

Location: United States

Posted: March 22, 2012 at 5:53 PM / IP Logged

This works just fine, and eliminates the problem of the alarm needing to wait for the 25 seconds of domight to arm the doors when exiting the vehicle. Arming with the alarm's remote is now instant as the dome light extinguishes immediately by using these wires to send lock signal to.

Sort of surprised there was no info about this anywhere on this site. I guess now there is.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

lock/arm '06 f350

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.