accessory not working during remote start

Home / the12volt's Install Bay / Car Security and Convenience / accessory not working during remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

morgiee

Member - Posts: 9

Joined: January 09, 2013

Location: United Kingdom

Posted: February 03, 2013 at 1:13 PM / IP Logged

Hi i successfully wired a Viper 5701 alarm and remote start to my Manual vehicle and as for as alarm and the remote start all is well. However when testing for the accessory wire i'm sure i found the correct wire after testing three times before connecting it up, however during the remote start sequence when try to turn on my heaters (on a manual switch) then don't work also the stereo goes off. But if you come out of the remote start (key takeover) the heaters come back on and so does the stereo. Not a major issue but would be nice to set the heaters so that on a really cold morning not only is the engine warming up but so is the inside of the car.

What could be the problem?

Many Thanks

pentavolvo

Copper - Posts: 241

Joined: September 30, 2003

Location: United States

Posted: February 03, 2013 at 2:34 PM / IP Logged

you missed an accessory wire most likely or an ignition wire. what year and make vehicle

kreg357

Platinum - Posts: 7,789

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 03, 2013 at 3:05 PM / IP Logged

Did you connect all three H3 fused power wires to +12V constant? ( Red, RED / White and RED / Black )

Soldering is fun!

morgiee

Member - Posts: 9

Joined: January 09, 2013

Location: United Kingdom

Posted: February 03, 2013 at 4:59 PM / IP Logged

pentavolvo wrote:

you missed an accessory wire most likely or an ignition wire. what year and make vehicle

Citroen Saxo, its a European vehicle and i did test for an accessory and i believe i wired it up. But i thought the remote start would work if this wasn't wired anyway?

morgiee

Member - Posts: 9

Joined: January 09, 2013

Location: United Kingdom

Posted: February 03, 2013 at 5:04 PM / IP Logged

kreg357 wrote:

Did you connect all three H3 fused power wires to +12V constant? ( Red, RED / White and RED / Black )

Would have to look again on Tuesday but i know for sure RED / white is not connected as i don't have a second ignition.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

accessory not working during remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.