alarm output

Home / the12volt's Install Bay / Car Security and Convenience / alarm output (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

recks

Member - Posts: 9

Joined: May 06, 2013

Location: California, United States

Posted: May 06, 2013 at 2:53 AM / IP Logged

Hey guys I have a quick question, I was wondering if I can use my alarm output for more than one use? For example starter kill, window roll up?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 06, 2013 at 7:13 AM / IP Logged

Define alarm output.

Are you talking about NEG aux outputs?

If so then yes of course.

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 06, 2013 at 11:29 AM / IP Logged

The starter kill output of the alarm has ground on it the entire time that the alarm is armed. As long as your window control module is good with a constant ground, you will be fine. If not, you will need to try and find a diagram that will convert the constant to a pulse without flattening (For Howie) your battery.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 06, 2013 at 11:31 AM / IP Logged

OK Craig, what do the colonials call it, draining?

recks

Member - Posts: 9

Joined: May 06, 2013

Location: California, United States

Posted: May 06, 2013 at 11:33 AM / IP Logged

howie ll wrote:

Define alarm output.

Are you talking about NEG aux outputs?

If so then yes of course.

Yes sorry i should of added that extra detail on my arm its labeled: Armed Output(-) 500mA.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 06, 2013 at 11:36 AM / IP Logged

That would be good for window closers such as the DEI 429t and 530t but not for a remote start, you would need a momentary output.

What alarm?

recks

Member - Posts: 9

Joined: May 06, 2013

Location: California, United States

Posted: May 06, 2013 at 11:39 AM / IP Logged

howie ll wrote:

That would be good for window closers such as the DEI 429t and 530t but not for a remote start, you would need a momentary output.

What alarm?

No remote start i know i have to use an AUX output I'm taking about a Starter Kill.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 06, 2013 at 11:44 AM / IP Logged

So use this diagram, a 1N4004 diode and a 5 pin Bosch/Tycho cube type automotive relay.

The orange wire in the diagram would be your armed output.

ZBF_cut.bmp

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.