The vehicle is a 2003 Chevrolet Silverado extended cab. Ok, I'm trying to stall my Avital 5103 Alarm/Remote start using Xpresskit DBALL. I've downloaded the current firmware to the DBALL. I've got the Doorlocks working, but no instant trigger when the doors are opened. The alarm will only trigger with shock sensor. Also the remote start will not activate at all. I'm looking for help on what wires I actually need and don't need using the DBALL with D2D. I've included the spreadsheet any information would be helpful. I already printed the wiring information and locations for my specific vehicle.
Vehicle Information: 2003 Chevrolet Silverado LS
Alarm / Remote Start Unit: Avital Model 5103
Bypass Module: Xpresskit DBALL
Alarm / Remote Start / Bypass Unit Vehicle
Connection Color Description Color Polarity Location:
PRIMARY HARNESS (H1), 12-pin Connector
H1/1 RED / White (-) 200mA AUX Trunk Release Output
H1/2 Red (+) Constant Power Input
H1/3 Brown (+) Siren
H1/4 Empty Not Used
H1/5 Black (-) Chassis Ground Input
H1/6 Violet (+) Door Trigger Input, Zone 3
H1/7 Blue (-) Instant Trigger Input, Zone 3
H1/8 Green (-) Door Trigger Input, Zone 3
H1/9 BLACK/ White (-) 200mA Domelight Supervision Output
H1/10 WHITE/ Blue (-) Remote Start Activation Input
H1/11 White (+)/(-) Selectable Light Flash Output
H1/12 Orange (-) 500mA Ground When Armed Output
AUXILIARY HARNESS (H2), 6-pin Connector
H2/1 Light Blue (-) 200mA Second Unlock Output
H2/2 WHITE/ Black (-) 200mA AUX 3 Output
H2/3 Violet/Black (-) 200mA AUX 2 Output
H2/4 GREEN / WHITE (-) 200mA Factory Alarm Rearm Output
H2/5 Gray/Black (-) Wait-To-Start Input
H2/6 Light GREEN/ Black (-) 200mA Factory Alarm Disarm Output
DOOR LOCK HARNESS, 3-pin Connector
1 Light Blue (-) Unlock (+) Lock Output
2 Empty Not Used
3 Green (-) Lock (+) Unlock Output
REMOTE START HARNESS (H3), 5-pin Connector
H3/1 BLACK/ White (-) Neutral Safety Switch Input
H3/2 Violet/White Tachometer Input Wire
H3/3 Brown (+) Brake Shutdown Input Wire
H3/4 Gray (-) Hood Pin Switch Input, Zone 6
H3/5 Blue/White (-) 200mA 2nd Status/Rear Defogger - Latched Pulsed
AUX 4, Horn, (H4), 2-pin Connector
H4/1 ORANGE / Black (-) 200mA AUX 4 Output
H4/2 Brown (-) 200mA Horn Output
HEAVY GAUGE RELAY SATELLITE WIRING HARNESS
H/1 Purple Starter Output to Starter (Starter Side)
H/2 Green Starter Input from Ignition (Key Side)
H/3 Red (+) (30A) High Current 12V Input
H/4 Orange Output to Accessory Circuit
H/5 Pink Output to Primary Ignition Circuit
H/6 Red (+) (30A) High Current 12V Input
H/7 Pink/White Output to Second Ignition Circuit
H/8 RED / White (+) (30A) High Current 12V Input
RELAY SATELLITE, 4-pin Connector
1 Blue (-) 200mA Status Output
2 Orange (-) 200mA Status Relay Turn On
3 Purple (-) 200mA Starter Relay Turn On
4 Pink (-) 200mA Ingition Relay Turn On
DBALL BYPASS UNIT
14 PIN CONNECTOR
2 Violet / YELLOW J1850
13 Red (+) 12v
14 Black (-) Ground
12 PIN CONNECTOR
3 GREEN / WHITE (-) Front Door Status Output
4 RED / Black (-) Trunk Status Output
5 Violet/White (AC) Tach Output
10 PIN CONNECTOR
1 Green (-) Lock Input
2 Blue (-) Unlock Input
3 RED / White (-) Rear Hatch Release Input
6 WHITE/ Black (-) AUX3 Heated Seats Input
10 Blue/White (GWR) Input