code alarm 530 troubleshoot

Home / the12volt's Install Bay / Car Security and Convenience / code alarm 530 troubleshoot (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jakef150

Member - Posts: 2

Joined: March 01, 2014

Location: New York, United States

Posted: March 01, 2014 at 11:40 AM / IP Logged

F150 04-

Code alarm 530 with flash logic PKford bypass keys

It's being since 2006 with no problem until yesterday.

Yesterday it stops working, will not unlock, lock, or start the motor.

I had to override it and drive home.

I took dashboard off and checked the wiring and everything it looks good and tested it again it WORKS BUT ONLY one isn't working is will not start the motor it kept cranks.

Please Help.

Thanks

freqsounds

Copper - Posts: 289

Joined: October 17, 2008

Location: Virginia, United States

Posted: March 01, 2014 at 7:52 PM / IP Logged

Put the key in the ignition (don't turn it) and try to remote start. If the truck starts, there's something wrong with the flash logic. It might need to relearn the key. Follow the instructions of the installation manual to relearn it.

No question is stupid or not worth asking. You were once a noob, right? :)

jakef150

Member - Posts: 2

Joined: March 01, 2014

Location: New York, United States

Posted: March 01, 2014 at 10:32 PM / IP Logged

Ok thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

code alarm 530 troubleshoot

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.