excalibur + blade remote start
Home /
the12volt's Install Bay /
Car Security and Convenience / excalibur + blade remote start (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: November 18, 2014 at 1:55 PM / IP Logged
I'm looking to do a remote start install on a 2010 Suzuki Kizashi. Am I missing anything to get this up and going? Also have a few questions below.
On remote start unit:
6 PIN MAIN:
Red & RED / White - 12V
Pink - Ignition +
Violet - Starter +
Orange - Accessory + ( I need this for heat/ac to turn on correct? )
18 PIN SECONDARY:
Black - Ground
BROWN / Red - Brake + (Can i wire this to Starter + ?)
BLACK/ White - Neutral Safety -
Violet/ White - Tach Signal (I dont know where to splice in for this, guide says fuel injector??)
Brown - Siren ( I need this for tach learn?)
This is the guide for the blade..
Posted: November 18, 2014 at 9:23 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
