'09 matrix remote start

Home / the12volt's Install Bay / Car Security and Convenience / '09 matrix remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stroker351w

Member - Posts: 10

Joined: December 09, 2014

Location: New Hampshire, United States

Posted: December 09, 2014 at 8:55 PM / IP Logged

Anything I should know about doing an '09 Matrix remote start with a Viper 4105V? I'm going to us a 556UW bypass because I don't have the ability to flash a PKALL.

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 10, 2014 at 6:12 AM / IP Logged

Got some good news for you. The PKALL comes pre-loaded with firmware and should be good to go right out of the box. No need to loose a key under the dash.

You might need an extra 30/40 Amp SPDT relay for the Starter2 wire if you have the 2.4 liter engine.

Soldering is fun!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'09 matrix remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.