2013 gmc dash lights

Home / the12volt's Install Bay / Car Security and Convenience / 2013 gmc dash lights (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: January 16, 2015 at 11:28 AM / IP Logged

Just finished a 2013 Gmc crew cab with a Avital 4103 and ADS-ALCA flashed with the DL-GM10 firmware. Works great except after shut down after the dome light times out I notice the dash lights stay on... just the back ground lights. Everything is hardwired and soldered. Is the door status on the ALCA need to be hooked up and what would I use from the starter???? Thanks

Back to Top

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: January 16, 2015 at 8:21 PM / IP Logged

Pulsed the door trigger and it took care of the problem!!!!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2013 gmc dash lights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.