truck starts itself when battery connecte

Trying to install a viper 5906 to a 2004 silverado base model. Using dball2 w2w. My current connection are as follows. 6pin main harness 1 12v constant 2 chassis gnd 3 siren 4 n/A 5 parking light - gray/blk bcm brown plug 6 n/a Door lock 3 pin plugged into 451m module Remote start 10 pin 1 n/a 2 12v constant ignition harness 3 n/a 4 white wire ignition harness 5 12v constant ignition harness 6 n/a 7 n/a 8 orange wire ignition harness 9 12v constant 10 pink wire ignition harness 24 pin conn 1 n/a 2 n/a 3 n/a 4 gray blk black plug bcm 5 ground while running wire to dball2 6 n/a 7 n/a 8 n/a 9 hood pin wire 10 n/a 11 n/a 12 tach wire to dball 2 13 chassis gnd 14 n/a 15 door output wire on dball 2 16 n/a 17 n/a 18 n/a 19 n/a 20 white wire on brake switch 21 through 24 n/a Dball2 module 12v constant ground Data wire to violet wire on obd2 When I hooked up batter and started truck I went to turn key off and motor kept running. Had to pull fuses from alarm harness in order to get motor to turn off. Disconnecting battery did not work. Can someone plz tell me what I've hooked up wrong or do I have a bad brain box

It's an automatic truck