2 way remote

Home / the12volt's Install Bay / Car Security and Convenience / 2 way remote

Welcome Guest :)

Members

< Prev Topic Next Topic >

daytontd

Member - Posts: 23

Joined: September 19, 2013

Location: Alberta, Canada

Posted: March 09, 2015 at 8:48 PM / IP Logged

I think I fried my brain on my module but hooking up my battery backwards... Anyways I have an Ultrastart U4296M module in my car. This is for a manual vehicle. The alarm beeps and chirps like it should but no outputs are working for door locks and all trunk etc. even though they were before. Does anyone know if I can use a module from a 1 way remote system with the exact same connections as mine or will the remote only act as a 1 way remote? Are these modules pretty much the same or do they actually leave out features from factory? Thanks

daytontd

Member - Posts: 23

Joined: September 19, 2013

Location: Alberta, Canada

Posted: March 09, 2015 at 8:50 PM / IP Logged

I forgot to mention that the reason for this question is because I cannot find a U4296M module anywhere.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.