06 Impreza Airbag Light

Hello, I installed a Compustar CS800-S in my brothers impreza. When I turn the car on with the remote start the airbag light stays on. But if I turn the car on with the key no airbag light. Whats weird is I installed a remote start on my 03 impreza and I dont have this problem. The only difference is I have a viper 2-way. So im not sure whats wrong. I double checked wire. They are the same on both cars. Checked the connections and everything looks good.. Thanks for the help!

How is it wired ? Is the outputs programmed correctly ? ( ing as ing and acc as acc )If i Can't Install it    I Don't need it   Joe

Yes the ing is ing and didnt hook up acc. I did the same on my car. Thanks for the help.

This is the guide I used.. https://www.the12volt.com/installbay/forum_posts.asp?tid=134600

I looked at a diagram for a 2006 Imprezza. There are 3 air bag fuses. All are powered from the GRN IGN 1 wire. I don't see any connection between the ACCY YEL wire and the air bags. From what I read in your post, you didn't power the ACCY in Remote Start. The only difference between RS and Key is that the ACCY is powered with the key. Put the key in ACCY position, and do a RS. Is the air bag light on or off? Also try do a RS, then turn key to ACCY. Again, what did the light do? If the light goes off with the key in ACCY, power the YEL ACCY wire for a RS. Looking at the diagrams, this shouldn't be it. But worth a try, as that's the only difference I see from your post.

Ill try this when I can get to his car again, hopefully friday. . Thanks for the ideas.

THAT WAS IT! So I noticed that in the middle of the dash where the clock is that the passenger ABL is that it turns on with ACCY. Then I did what you said and it didnt stay on.. So thank you for the help!! I feel alot better now!

davep. wrote: I looked at a diagram for a 2006 Imprezza. There are 3 air bag fuses. All are powered from the GRN IGN 1 wire. I don't see any connection between the ACCY YEL wire and the air bags. From what I read in your post, you didn't power the ACCY in Remote Start. The only difference between RS and Key is that the ACCY is powered with the key. Put the key in ACCY position, and do a RS. Is the air bag light on or off? Also try do a RS, then turn key to ACCY. Again, what did the light do? If the light goes off with the key in ACCY, power the YEL ACCY wire for a RS. Looking at the diagrams, this shouldn't be it. But worth a try, as that's the only difference I see from your post.

THAT WAS IT!!!